UV 3215 - uv adhesive for plastic bonding by capipllary

FOB Reference Price:Get Latest Price
US $1-100 / Piece | 20 Piece/Pieces (Min. Order)
Supply Ability:
30 Metric Ton/Metric Tons per Month
Report Suspicious Activity
Quick Details
Place of Origin:
Shandong, China (Mainland)
Main Raw Material:
urethane acrylate; Epoxy ester of acrylic
Fixing camera module
Brand Name:
Model Number:
Packaging & Delivery
Packaging Details
Delivery Time
Usually 7 dyas

Product Introduction


SEAYU ® UV3215 is a kind of one-com ponent ,low viscosity U V structural adhesive . This
product in wavelength for 200-400 nm of uv radiation can be fast curing, after curing
transparent, not bleaching. This product belongs to softness formula .It has e xcellent
resistance to impact and resistance to moisture performance .It is applicable for various
plastic materials bonding.


Properties Uncured
Item                                         Typical Value                   Range                       Test Standard
Appearance                  Light amber transparent liquid
Chemical type                        urethane acrylate
Viscosity (mPa.s@25 °C )                                              80-200                 GB/T2794-1995
Density (g/cm3)                         1.0 3                           1.0 0 -1.08         GB/T13354-1992
Tack free (s)                                <5s
Curing depth (mm@30s)               >2.5
Completely curing energy           > 1000mJ/cm2



Physical Properties                    Typical Value                                            Test Standard
Hardness ( Shore D )                       68                                                   GB/T2411-1980
Tensile strength (MPa)
PMMA/PMMA                                     >14
MMA/Glass                                      > 14
Elongation at break ( % )                    120                                                      GB 1040-1992

Work temperature ( °C )                 -50-1 5 0



Electric Properties                       Typical Value                                            Test Standard
Dielectric constant (1MHz)               3.6                                                       GB/T1693-2007
Dielectric loss (1MHz)                      0.0 3                                                    GB/T1693-2007
Dielectric strength (KV/mm)           34                                                    GB1410-1989
Volume resistivity ( Ω .cm)                 9×  10 (12)                                         GB1410-1989


Instructions  Use
The Surface to be bonded should be clean and dry.
Spread the adhesive onto the surface to be bonded.
Exposed to UV light measured @ 365nm , make sure the material to be bonded is light

Curing rate is dependent on UV light intensity, distance form light source, and curing time.
Close the lid as soon as finish the operation. Spread the glue with black container, keep
way from daylight, UV light and artificial lighting.



Keep far away from children.
U se at well ventilated place is recommoned .
In case of contact with skin, rinse with soap water immediately. If contact with eyes, rinse
with a plenty of clean water immediately and go to the hospital for an examination .
For further information, please refer to MSDS.







Store at 8 - 28 °C , keep away from light and moisture.
Shelf life : 12 months.


 About Us

Our transportation

Our contact details