SEAYU® S680 is a single component, high strength, medium viscosity, anaerobic retaining compound. The goods in the two close coordination between the metal and is isolated from the air when cured due to vibration and impact, can prevent the leakage.
Mainly used for hole and shaft fitting. Especially suitable for the requirement of high strength condition.
Type Properity Typical value Typical Range
Chemical Type Methyl Methacrylate fat Color Green Viscosity (mPa.s@25 °C ) 1250 800 - 1750 Specific Gravity ( @25 °C ) 1.08 1.00 -1.10 Gap Fill ( mm ) 0. 25 Shear Strength ( Mpa ) 24 ≥ 2 1 Temperature ( °C ) -54-1 75 Fixture Time ( min @25 °C ) 15 10 - 20 Cured Time ( h @25 °C ) 24
The graph up shows the contaction between cured speed and material , Steel and in accordance with ISO 10123 of the tests in different ways of the shear motoki strength and fixation of time relations.
Direction for Use
To achieve the best effect, should make the solid surface oil -free, dust-free ,and ensure the gap to fill with glue. 1.For sliding tie,only need bobbin and provided with a corner, assembling the left-right rotating to ensure good coating. 2. For press fit,two coated surface need with glue-coating. And in the proper pressure machine assembly. 3.For heat-shrinkable tie, glue coating on the shaft, then heat, the shaft sleeves can be assembled into a collar.Without enough strength to assemble before, don't touch.
This product is not used for pure oxygen or oxygen-enriched system.Cannot be used for storage of chlorine has strong oxidizing substances.Don't take back the glue, prevent pollution original packaging.This product is used for plastic products. Workplace should ventilated, or forced ventilation. Please keep away from children. This product contains acrylic and methacrylic acid esters. It basically is mixed to the skin, eye has stimulative effect. If gets to skin, please immediately with soap and water cleaning. If you touch the eyes carelessly, please use a lot of clean water and call a physical attention. Please refer to the details of this product MSDS .
Order code : 1360023 50ml/ bottle Order code : 1360030 250ml/ bottle Atorage:
Store the product in a clean and dry location in unopened containers at 8-28 °C . Shelf-life:18month